Domra bridge : 3 or 4 string

    This is a hand-made replacement bridge in maple, to fit old 3 or 4 string domras, and is based on an existing domra bridge.

   It is 80mm long, 20mm tall before fitting, and 4-5mm wide. It can be fitted with a bone saddle if required. It will suit required bridge heights of 10-20mm.

   It will need to be fitted, which can be achieved by sanding the foot, and fine tuned by lowering the height at the string slots.

   String slots can be cut if requested, but I will need to know required spread of strings.