Neapolitan Bridge : ‘Fenga’

    This is a hand-made replacement bridge in ebony or rosewood with bone or brass saddle, to fit old bowlbacks, or flatbacks with a low string profile.

   It is 120mm long, 12-15mm tall before fitting, and 6mm wide. The bone saddle is approximately 45-48mm long. It will suit required bridge heights of 4-12mm. depending on the curve of the top.

   It can be accompanies by a tensioner if required.

   It may need to be fitted, but will comes with a flat or curved foot, as requested.

   String slots can be cut if requested, but I will need to know required spread of strings and gauges to be used.